Machines
Hydraulic Puller-Tensioner
100 kN (2 x 50 kN)
Hydraulic machine designed to operate both as a tensioner and as puller, fit to string one or two ropes or conductors. Two hydraulic circuits allow to tension at constant force even varying the speed of stringing. The two circuits can be used independently or simultaneously, with automatic forces partition. In puller mode, 2 closed hydraulic circuits allow to vary the speed in both directions, allowing to use one of the hydraulic circuits or both of them matched.
CONFIGURATION:
Two pairs of steel capstans lined with multi-grooved nylon sectors
Machine control panel equipped with built-in electronic instrument DEG 4.0 featuring a 7’’ large graphic colour display and a USB port
Maintenance-free load cell reading system
Electronic instrument by-pass
Self-recovery device for sagging operations
In puller mode, device for pull-force setting, which allows to maintain the pre-set force even at speed “0”
Freewheeling disconnection (neutral) of capstans
Two safety negative hydraulic brakes
Back fix conductor-driver with nylon rollers for 2 cond
Chassis with rigid axle, manual brake and detachable drawbar for towing at low speed in job-site
Hydraulic front plough and back stabilisers
Attachments for anchoring and for lifting
Oil cooling system
Devices for coupling the two pairs of capstans
Two auxiliary hydraulic circuits for additional equipment (1 or 2 reel-winders or reel-stands)
Grounding connection point
Features
- 045.2 Automatic clamp for 2 ropes/conductors
- 038 Radio remote controls
- 107 OLS – OMAC Link System, GPS geolocation & remote monitoring and diagnostics
- 012 Hydraulic circuit to feed a press for high pressure joints (max 700bar)
- 174.2 Synchtonising device for the connection of two machines complete with remote control by cable.
- 072.2 System to lubricate automatically
Specifications
| Model No. | F120.AF.100.22 |
|---|---|
| Weight (kg) | 6200 |
| Length (cm) | 450 |
| Width (cm) | 225 |
| Height (cm) | 80 |
| Features Capstans (mm) | 4 x 1500 |
| Features Max Conductor Diameter (mm) | 2 x 42 |
| Features Max Rope Dimeter (mm) | 18 |
| Engine Feeding | Diesel |
| Engine Power (HP-kW) | 135 / 105 |
| Engine Cooling | Water |
| Engine Electic Plant (V) | 12 |
| Pull Performance Max Pull (kN) | 1 x 100 or 2 x 50 |
| Pull Performance Speed At Max Pull (km/h) | 2.4 |
| Pull Performance Max Speed (km/h) | 5 |
| Pull Performance Pull At Max Speed (kN) | 50 |
| Tension Performance Max Tension Force (kN) | 1 x 100 or 2 x 45 |
| Tension Performance Max Speed (km/h) | 5 |