Mini Crane

The M-Crane 1030 RT does two jobs. It transports material over ground that a forklift or a truck cannot use. It also lifts and places that material with a telescopic crane.The machine is 890 mm wide. It goes through a standard doorway and a standard site gate. Ground clearance is 170 mm. The load deck sits 830 mm above the ground.Drive is fully electric. Two AC motors give a combined 10.6 kW and run at IP67. There is no exhaust and the noise level is low. Use the machine inside occupied buildings, in basements and in plant rooms.The operator works the machine from a remote radio control. The operator stands clear of the load and can see the lift from the best position.Three power modes control speed and battery life:

• ECO: Speed 1.2 km/h | Range unladen ~3,500 m | Range at 1500kg ~3,000 m
• STD: Speed 1.8 km/h | Range unladen ~3,100 m | Range at 1500kg ~2,500 m
• POW: Speed 4.2 km/h | Range unladen ~2,700 m | Range at 1500kg ~2,000 m

Where it suits the job

Material transport across slabs, courtyards, gardens and soft ground Lifting and placing where a mobile crane has no access Plant and equipment installation in plant rooms and basements Work inside occupied or enclosed buildings, where exhaust fumes are not acceptable

Where it doesn’t

The machine runs on battery. The charger takes 9 hours from a 110 V to 230 V supply. Plan the charge cycle into the shift. On a job with continuous heavy duty over a full day, check the duty cycle with us first.The two capacities are separate. The 1500 kg figure is the carrier deck, on gradients under 25 degrees. The crane lifts a maximum of 990 kg, and that figure reduces as the outreach increases. Check your load and radius against the load chart before you book.Gradient limits are lower during a lift than during travel. The machine translates on up to 22 degrees longitudinal and 10 degrees lateral. It operates the crane on up to 10 degrees longitudinal and 5 degrees lateral.

Before you hire, check

• The load mass and the lift radius, against the load chart
• The access route, including every doorway, gate and lift opening on the path
• The floor or ground the machine will work on. Total machine weight is 2000 kg before any load
• Whether the surface requires non-marking tracks. These are an option, not standard

Our engineers can review slab loading if you are not sure the floor will take it. The M-Crane is part of Legend Hire’s lift and shift range alongside hydraulic jacking equipment and the Multi-Loader 1.5 FX.