OMAC PT80.2 Hydraulic Puller-Tensioner

The OMAC PT80.2 is a hydraulic machine designed to operate both as a tensioner and as a puller, stringing one or two ropes or conductors. As a puller it delivers a maximum pull of 80 kN at 2 km/h, and 35 kN at its top speed of 5 km/h. As a tensioner it delivers a maximum tension of 80 kN, with a top speed of 5 km/h.The machine has one pair of steel bull-wheels lined with multi-grooved nylon sectors, 2 x Ø1500 mm with 10 grooves. It accepts conductors up to 2 x 42 mm and ropes up to 18 mm in diameter. A version with Ø1800 mm bull-wheels is also available. A device to control low-force tensions (2–25 kN) is fitted as standard and is suited to OPGW.Power comes from a water-cooled diesel engine rated at 100 hp (75 kW), with a 12 V electric plant. An oil cooling system is fitted, and two auxiliary hydraulic circuits run additional equipment (1 or 2 reel-winders or reel-stands).The operator works from a control panel with a built-in DEG 10 electronic instrument, which has a 10″ graphic colour display and a USB port. The PT80.2 uses a maintenance-free load cell reading system and has an electronic instrument by-pass. In puller mode, a pull-force setting device holds the pre-set force even at zero speed. It also has a self-recovery device for sagging operations, a negative hydraulic safety brake, a manual clamp for 2 ropes or conductors, and a back fix conductor-driver with nylon rollers for 2 conductors.As standard, the PT80.2 sits on a rigid-axle chassis with a manual brake and a detachable drawbar for low-speed towing on the job site. It has a hydraulic front plough and back stabilisers, attachments for anchoring and lifting, and a grounding connection point. The machine measures 3.95 m long, 2.10 m wide and 2.20 m high, and weighs 4800 kg without rope.

Optional Devices

• Damped axle, air braking system, drawbar and lights.
• Arrangement of the chassis for circulation on road (homologation excluded).
• Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).
• Reel-winder arm fit for a 1600 mm dia. reel.
• Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• Remote control by cable, with 10 m of cable.
• Radio-control (max distance 100 m).
• Automatic clamp for 2 ropes/conductors.
• Printer for the electronic recorder, with accessories.
• Bull-wheels with steel grooves chemically treated.
• Synchronising device for the connection of 2 machines, complete with remote control by cable (20 m).
• Automatic lubricating system.