OMAC T150.22 Hydraulic Tensioner

The OMAC T150.22 is a machine with two hydraulic circuits, designed to operate as a tensioner and string one or two conductors. It delivers a maximum tension of 1 x 150 kN or 2 x 75 kN, with a top speed of 5 km/h. In pull-back mode it delivers a maximum pull of 1 x 150 kN or 2 x 75 kN at 0.7 km/h.The machine has two pairs of steel bull-wheels lined with multi-grooved nylon sectors, 4 x Ø1500 mm with 12 grooves, and devices to couple the two pairs. It accepts conductors up to 2 x 42 mm and ropes up to 28 mm in diameter. A hydraulic device on one circuit controls low tension values (3–30 kN) and is suited to stringing fibre optics.Power comes from a water-cooled diesel engine rated at 75 hp (55 kW), with a 12 V electric plant. An oil cooling system is fitted, and two auxiliary hydraulic circuits run additional equipment (1 or 2 reel-stands).The operator works from a control panel with two built-in DEG 10 electronic instruments, each with a 10″ graphic colour display and a USB port. The T150.22 uses a maintenance-free load cell reading system and has an electronic instrument by-pass. It also has a self-recovery device for sagging operations, two negative hydraulic safety brakes, a manual clamp for 2 ropes or conductors, and back fix conductor-drivers with nylon rollers for 2 conductors.As standard, the T150.22 sits on a rigid-axle chassis with a manual brake and a detachable drawbar for low-speed towing on the job site. It has a hydraulic front plough and back stabilisers, attachments for anchoring and lifting, and a grounding connection point. The machine measures 4.50 m long, 2.47 m wide and 2.65 m high, and weighs 8900 kg.

Optional Devices

• Chassis with 2 damped axles (tandem), air braking system and lights.
• Damped axle, air braking system, drawbar and lights.
• Arrangement of the chassis for circulation on road (homologation excluded).
• Device to start the diesel engine and the hydraulic circuit at low temperatures (up to -30°C).
• Remote control by cable, with 10 m of cable.
• Radio-control (max distance 100 m).
• Automatic clamp for 2 ropes/conductors.
• Printer for the electronic recorder, with accessories.
• Synchronising device for the connection of 2 machines, complete with remote control by cable (20 m).
• Set of nylon sectors with grooves fit for 3 conductors Ø max 31.5 mm (instead of standard set), and 1 additional hydraulic circuit to control 1 extra reel-stand (total 3). Machine weight increases by 800 kg.
• Hydraulic circuit to feed a press for high pressure joints (max. 700 bar).